User Manual Q&AAnswer
Sep 01, 2025 - 09:13 PM
To adjust the output voltage of the FLD-nano flashlamp driver, you have two options: manual adjustment using the onboard trimpot or remote adjustment by applying a DC voltage to the respective pin.
1. **Manual Adjustment:**
- Set the jumper between PINs 1 and 2 of the INTERFACE connector to use the VOLTAGE PROGRAM trimpot.
- Turn the VOLTAGE PROGRAM trimpot to adjust the output voltage level manually.
2. **Remote Adjustment:**
- Apply a DC voltage to the respective pin to adjust the output voltage remotely within the working range specified.
Remember, the output voltage can be programmed within the working range by the user, either manually or remotely, to suit your specific requirements. Refer to the user manual for detailed instructions and safety precautions when adjusting the output voltage of the FLD-nano flashlamp driver.
Add New Comment