User Manual Q&AAnswer
Sep 01, 2025 - 04:07 AM
To connect the Wi-Fi Smart Controller to the RGB LN22LD11 LED Strip, follow these steps:
1. **Power Connection:**
- Connect the Wi-Fi Smart Controller to a power source using a DC 5-12V power supply.
- Ensure that the power supply meets the input requirements of the controller.
2. **Wi-Fi Setup:**
- Make sure your smartphone is connected to a 2.4GHz Wi-Fi network.
- Download and install the eWeLink app from the Google Play Store (for Android) or the App Store (for iOS).
- Open the eWeLink app and create an account if you don't have one already.
3. **Controller Setup:**
- Open the eWeLink app and tap on the "+" icon to add a new device.
- Select "Quick Pairing" and follow the on-screen instructions to put the Wi-Fi Smart Controller into pairing mode.
- The app should detect the controller, and you can proceed to connect it to your Wi-Fi network by entering your Wi-Fi credentials.
4. **LED Strip Connection:**
- Once the Wi-Fi Smart Controller is successfully connected to your network, you can now connect the LED strip to the controller.
- Follow the wiring diagram provided in the user manual to connect the LED strip to the controller. Typically, you will connect the RGB wires of the LED strip to the corresponding terminals on the controller.
5. **Control via App:**
- After the setup is complete, you can use the eWeLink app to control the RGB LN22LD11 LED Strip remotely.
- Explore the app's features to change colors, brightness, and other settings as per your preference.
By following these steps and referring to the user manual for any specific instructions related to your LED strip model, you should be able to successfully connect the Wi-Fi Smart Controller and start controlling your LED strip via the eWeLink app.
Add New Comment