User Manual Q&AAnswer
Sep 01, 2025 - 03:16 AM
To connect the Wi-Fi Smart Controller to the RGB LED Strip Lights, follow these steps:
1. **Power Supply:** Ensure that the AC Adapter is connected to a power source and the LED strip lights are powered on.
2. **Wi-Fi Setup:** Make sure your Wi-Fi network is operating on the 2.4GHz frequency, as the controller supports IEEE802.11 b 2.4GHz.
3. **App Installation:** Download the compatible app on your Android or iOS device. The app should be available on Google Play Store or Apple App Store.
4. **Controller Setup:**
- Connect the Wi-Fi Smart Controller to a DC power source within the input range of 5-12V.
- Follow the app's instructions to pair the controller with your Wi-Fi network. This usually involves selecting the controller from the app and entering your Wi-Fi credentials.
5. **Remote Control Setup:**
- Insert the battery (3V CR2025) into the 24Keys Remote Controller.
- The remote controller can be used as an alternative control method if needed.
6. **Functionality:**
- Once connected, you can use the app to control the RGB LED Strip Lights remotely. You can change colors, adjust brightness, set schedules, and more.
7. **Voice Control:**
- If you want to use voice commands, ensure that the Wi-Fi Smart Controller is compatible with Hey Google and Alexa. Follow the respective setup instructions for voice control integration.
By following these steps and referring to the user manual for any specific details, you should be able to successfully connect the Wi-Fi Smart Controller to the RGB LED Strip Lights for enhanced control and customization options.
Add New Comment