User Manual Q&AAnswer
Sep 01, 2025 - 01:39 AM
To properly set up your Bestway Fast Set Inflatable Pool including the filter pump, follow these steps as outlined in the instruction manual:
1. **Choose the Correct Location:**
- Select a flat, smooth surface away from objects children could use to climb into the pool.
- Position the pool near adequate drainage and away from overhead power lines or trees.
- Ensure the surface is free of aggressive plants, holes, and objects that could damage the pool.
2. **Installation:**
- Installation typically takes about 10 minutes with 2-3 people, excluding earthworks and filling.
- Do not over-inflate the top ring or drag the pool on the ground to prevent damage.
3. **Filling Pool with Water:**
- Fill the water until the wall is straight up and reaches the welding line.
- Do not overfill, as this could cause the pool to collapse. Adjust water level if needed.
4. **Pool Maintenance:**
- Use chemical tablets or liquid as recommended, ensuring proper dosage and placement.
- Regularly clean the pool, skim debris, check and wash the filter cartridge, and maintain water clarity.
5. **Repair:**
- In case of a leak, patch the pool using the underwater adhesive repair patch provided.
6. **Dismantling:**
- Follow the instructions to drain the pool properly, deflate the top ring, and store the pool and accessories in a dry place.
7. **Storage:**
- Remove all accessories, store them clean and dry, sprinkle with talcum powder, and fold the pool carefully for storage.
By following these steps and referring to the detailed instructions in the manual, you can ensure a safe and enjoyable experience with your Bestway Fast Set Inflatable Pool including the filter pump. For further assistance or FAQs, visit the support section on the Bestway website.
Add New Comment