User Manual Q&AAnswer
Aug 31, 2025 - 09:56 PM
To program or reprogram the HYUNDAI MOBIS FOB-4F61U43 Remote Keyless System, follow these steps as outlined in the user manual:
1. **Initialization:** Make sure the vehicle is parked and the engine is turned off. Close all doors.
2. **Entering Programming Mode:**
- Insert the key into the ignition and turn it to the ON position (do not start the engine).
- Within 4 seconds, press the LOCK button on the transmitter.
3. **Programming Transmitter:**
- The door locks will cycle to confirm entering the programming mode.
- Press any button on the transmitter to be programmed. The door locks will cycle again to confirm successful programming.
4. **Exiting Programming Mode:**
- Turn the ignition key to the OFF position.
- Test the transmitter to ensure it is working correctly.
5. **Additional Transmitters (if needed):**
- Repeat steps 2-4 for each additional transmitter you want to program.
6. **Verification:**
- Test each transmitter to confirm they are all working properly and controlling the desired functions.
By following these steps, users can successfully program or reprogram their HYUNDAI MOBIS FOB-4F61U43 Remote Keyless System as per the manufacturer's instructions. It is important to refer to the user manual for specific details and any additional information related to the programming process.
Add New Comment