User Manual Q&AAnswer
Aug 29, 2025 - 11:23 PM
To install the PHILIPS RC048 Smartbright Direct Panel, please follow these steps as outlined in the instruction manual:
1. Ensure the luminaire is intended for indoor use only.
2. Do not switch on the panel before completing the installation process.
3. The installation should be carried out by a qualified electrician and wired according to the latest IEE electrical regulations or national requirements.
4. If the external flexible cable or cord of the luminaire is damaged, it should only be replaced by the manufacturer, their service agent, or a similarly qualified person to prevent hazards.
5. Do not cover the luminaire with thermal insulation or similar material at any time.
6. The light source within the luminaire should only be replaced by the manufacturer, their service agent, or a qualified person.
7. The luminaire complies with IEC 60598 standards.
8. Avoid exposing the luminaire to corrosive atmospheres or hazardous materials such as sulfur, chlorine, phthalate, etc., during use and storage.
Additionally, the manual provides information on responsible disposal of the product to prevent harm to the environment or human health. It is recommended to recycle the product through designated return and collection systems or contact the retailer where the product was purchased for proper disposal.
By following these guidelines and precautions, you can ensure the safe and proper installation of the PHILIPS RC048 Smartbright Direct Panel.
Add New Comment