User Manual Q&AAnswer
Aug 29, 2025 - 11:14 PM
To connect and configure the Rogue Outcast 3 Spot for DMX operation, follow these steps:
1. **DMX Connection:** The Rogue Outcast 3 Spot uses a 5-pin DMX data connection for its DMX personalities: 20CH and 25CH. You will need a DMX controller with a 5-pin DMX serial connection to control the moving head.
2. **DMX Linking:** Make sure to link the Rogue Outcast 3 Spot to your DMX controller using the appropriate DMX cables. Refer to the User Manual for detailed instructions on how to set the DMX address and configure the DMX personalities (20CH or 25CH) for the moving head.
3. **RDM (Remote Device Management):** The Rogue Outcast 3 Spot supports RDM protocol, allowing for bi-directional communication along existing DMX cabling. This feature enables feedback to make changes to menu map options. Ensure your DMX controller supports RDM functionality for enhanced control over the moving head.
4. **Additional Resources:** For more detailed information on connecting and configuring the Rogue Outcast 3 Spot for DMX operation, refer to the User Manual available for download from www.chauvetprofessional.com. The manual provides comprehensive instructions on setting up and utilizing the moving head with a DMX controller.
Add New Comment