User Manual Q&AAnswer
Aug 29, 2025 - 04:15 AM
To install a new bulb or replace an existing one in the Lithonia Lighting GU10 Track Line Voltage Fixture, follow these steps as outlined in the instruction manual:
1. **Turn off the power:** Before starting any work on the fixture, ensure that the power is turned off to prevent any electrical hazards.
2. **Allow the bulb to cool:** Make sure that the bulb is cool to the touch before attempting to replace it to avoid burns or damage.
3. **Remove the head from the track:** Pull down the track head sleeve and twist it 1/4 turn to remove the head from the track.
4. **Replace the bulb:** Twist the existing bulb to remove it from the socket. Replace it with a new bulb of the same type and wattage.
5. **Reattach the track head:** Place the track head back onto the track. Pull down the locking sleeve and reverse the 1/4 turn to secure the head in place.
By following these steps carefully, you can safely install a new bulb or replace an existing one in the Lithonia Lighting GU10 Track Line Voltage Fixture. Remember to always refer to the instruction manual for specific details and safety guidelines.
Add New Comment