User Manual Q&AAnswer
Aug 27, 2025 - 12:14 AM
To pair the remote control with the power socket for the Rebel URZ1226-3 Power Socket with Remote Control, follow these steps:
1. Insert the plug of the socket into the power socket. The red indicator light on the device will start flashing, indicating it is ready for pairing.
2. On the remote control, press the ON button from any row (A, B, C, or D) to pair it with the socket switch. The correct pairing will turn on the continuous light of the indicator on the socket.
3. To pair more sockets with the remote control, repeat the procedure using the ON button in a row other than the one currently occupied.
4. To unpair an outlet, remove it from the main outlet and plug it back in to start the pairing mode. Then press the OFF button on the remote control in the row corresponding to the pairing letter you want to delete. The socket will go back to pairing mode.
By following these steps, you can easily pair and unpair the remote control with the power socket for your Rebel URZ1226-3 device.
Add New Comment