User Manual Q&AAnswer
Aug 26, 2025 - 10:14 PM
To change the input voltage source frequency for the non-inverting amplifier frequency response simulation using the ROHM TLR377YG-C, follow these steps:
1. Open the simulation schematic provided in the user guide.
2. Locate the input voltage source component in the schematic, typically labeled as "VSOURCE."
3. Modify the frequency of the input voltage source by changing the parameters associated with the VSOURCE component. This may involve adjusting the frequency value in the properties or settings of the VSOURCE component.
4. Once you have updated the frequency of the input voltage source, you can run the simulation to observe the AC gain and phase response of the non-inverting amplifier at the new frequency.
Remember to refer to the user guide for specific details on how to navigate the simulation settings and make adjustments to the input voltage frequency. Additionally, ensure that you consider the cautionary notes provided in the user guide regarding simulation results and component characteristics.
Add New Comment