User Manual Q&AAnswer
Aug 26, 2025 - 07:52 PM
To switch between connected computers using the StarTech SV231HU34K6 or SV231DHU34K6 2 Port USB 3.0 KVM Switch, follow these steps:
1. **Select A Port:**
- Press the Port Selection Button located on the front of the KVM Switch until the desired Computer has been selected.
- The PC Selection Indicators on the front of the KVM Switch will show which computer is currently connected and selected. Green indicates the PC is connected, and red indicates the port is selected.
2. **Wait for Video Signal:**
- When you switch between ports, it may take a few seconds for the video signal to be communicated.
- After selecting a port, wait three to four seconds before selecting a different port to ensure a smooth transition.
3. **Hot Keys Commands (Optional):**
- You can also use Hot Key Commands for switching between connected computers. Refer to the user manual or visit the provided links for detailed instructions on using Hot Key Commands.
By following these steps, you can easily switch between connected computers using the StarTech SV231HU34K6 or SV231DHU34K6 2 Port USB 3.0 KVM Switch.
Add New Comment