User Manual Q&AAnswer
Aug 25, 2025 - 10:35 PM
Excessive vibration during the spin cycle of your washing machine can be caused by various factors. Here are some troubleshooting steps based on the user manual for the CROWN ALW 80T Washing Machine:
1. **Adjust the Feet:** Ensure that the adjustable feet of the machine are properly adjusted to level the machine. If the feet are not adjusted correctly, it can lead to increased vibration. Follow the instructions in the manual to adjust the feet properly.
2. **Remove Transit Bolts:** If the transit bolts used for transportation have not been removed, they can cause heavy vibration and noise during operation. Make sure the transit bolts have been removed before using the machine.
3. **Evenly Spread Laundry:** Unevenly distributed laundry inside the drum can also cause vibration during the spin cycle. Make sure to spread the laundry evenly inside the drum to balance the load.
4. **Overloading:** Overloading the machine with laundry can lead to excessive vibration. Check that you are not exceeding the maximum load capacity for the selected programme.
5. **Hard Surface:** Placing the washing machine on a hard surface can amplify vibrations. Ensure that the machine is placed on a firm and level surface to minimize vibration.
By following these steps and ensuring proper installation and load distribution, you should be able to reduce excessive vibration during the spin cycle of your CROWN ALW 80T Washing Machine. If the issue persists, it is recommended to contact the nearest authorized service center for further assistance.
Add New Comment