User Manual Q&AAnswer
Aug 25, 2025 - 07:28 PM
To configure dynamic routing on the Hillstone CloudEdge Virtual Next-Generation Firewall, follow these steps based on the information provided in the owner's manual:
1. **Accessing Configuration Settings:**
- Log in to the CloudEdge graphical management interface using a web browser.
- Navigate to the routing configuration section.
2. **Configuring Dynamic Routing:**
- Hillstone CloudEdge supports dynamic routing protocols like OSPF, BGP with graceful restart, and RIPv2.
- Choose the appropriate dynamic routing protocol based on your network requirements.
- Configure the routing protocol parameters such as network prefixes, neighbors, authentication, and other settings as needed.
3. **Additional Routing Options:**
- Hillstone CloudEdge also supports static and policy routing.
- You can define static routes for specific network destinations.
- Policy routing allows you to control routing decisions based on specific criteria like application or source/destination IP.
4. **Verification and Testing:**
- After configuring dynamic routing, verify the routing table to ensure that routes are correctly propagated.
- Test the routing functionality by sending traffic between different network segments to confirm proper routing behavior.
5. **Monitoring and Troubleshooting:**
- Utilize the CloudEdge's logging and monitoring features to track routing events and troubleshoot any routing issues.
- Check the routing protocol status and neighbor relationships for any anomalies.
By following these steps and referring to the detailed configuration options provided in the owner's manual, you can effectively set up dynamic routing on the Hillstone CloudEdge Virtual Next-Generation Firewall to optimize network connectivity and routing efficiency.
Add New Comment