User Manual Q&AAnswer
Aug 23, 2025 - 07:06 PM
According to the provided manual, the PHILIPS PATPA Antumbra Touch User Interface must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations. Here are some key installation instructions and guidelines as outlined in the manual:
1. **Compliance with FCC Regulations:** The device complies with FCC regulations for Class B digital devices. Users should follow the guidelines provided to minimize the risk of harmful interference in a residential installation.
2. **Canadian Compliance:** The device also complies with Canadian ICES-003 standards.
3. **Home and Building Automation System Installation:** Installation of the system should comply with IEC 60364 standards, ensuring that temperature limits and current-carrying capacities for communication wires are not exceeded.
4. **Avoiding Interference:** If the equipment causes harmful interference to radio or television reception, users are encouraged to try various measures such as reorienting the receiving antenna, increasing separation between equipment and receiver, or consulting a professional for assistance.
5. **Safety Precautions:** Users should not connect inputs to mains, disconnect power before connecting or separating modules, and refer to the Service Guide for cleaning recommendations.
6. **Manufacturer's Disclaimer:** Any modifications not approved by the manufacturer could void the user's authority to operate the device.
It is essential to follow these installation instructions carefully to ensure proper functioning, compliance with regulations, and safety. For further details and specific guidelines, users are advised to refer to the complete manual provided with the product or visit the manufacturer's website for additional support.
Add New Comment