User Manual Q&AAnswer
Aug 23, 2025 - 05:57 PM
According to the installation instructions provided by the manufacturer, the PHILIPS PDRxE Revolution Euro User Interface must be installed by a qualified electrician in compliance with all national and local electrical and construction codes and regulations. Here are some key points to consider for proper installation:
1. **Qualified Installation:** Ensure that the installation is carried out by a qualified electrician who is familiar with electrical and construction codes.
2. **FCC Compliance:** The device has been tested to comply with FCC regulations for Class B digital devices. To prevent harmful interference with radio communications, follow the installation instructions carefully.
3. **Interference Mitigation:** If the equipment causes interference with radio or television reception, try the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to a different circuit than the receiver.
- Consult a dealer or experienced technician for assistance.
4. **Canadian Compliance:** The device also complies with Canadian ICES-003 standards.
5. **Safety Precautions:** Do not connect inputs to mains and disconnect power before connecting or separating modules to prevent electrical hazards.
6. **Cleaning Recommendations:** Refer to the Service Guide for full cleaning recommendations to maintain the device properly.
7. **Manufacturer's Disclaimer:** Any modifications not approved by the manufacturer could void the user's authority to operate the device.
By following these guidelines and precautions, users can ensure the proper installation of the PHILIPS PDRxE Revolution Euro User Interface while adhering to regulatory standards and minimizing the risk of interference or safety hazards.
Add New Comment