How do I install the Programmer for the WIRELESS PACIFIC Out of Vehicle Communication Solution on my Windows PC? (WIRELESS PACIFIC X100R Vehicle Communication Solution User Guide)

Answer

manuals.plus

Aug 23, 2025 - 06:10 AM

To install the Programmer for the WIRELESS PACIFIC X100R Out of Vehicle Communication Solution on your Windows PC, follow these steps:

1. Ensure your PC is running Windows 7 or 10 and has a USB 2 port available. The programmer will not work with USB 3 ports.

2. Download the Programmer application from the provided file.

3. Connect the programming cable between the device's hirose port (for the handset) or micro-USB port (for the gateway) and your PC.

4. Turn off the handset or gateway, then press the appropriate button while holding down the PTT to put the device into programming mode. The LED will light red.

5. Read the device before proceeding further to ensure proper programming.

6. Use the Programmer application to load current programming parameters from the device to the screen or vice versa.

7. Save the file onto your PC for re-loading if required.

8. Follow the instructions provided in the Programmer application to set up the desired parameters for your device.

9. Press the Restart button before removing the programming cable to ensure changes take effect.

10. For specific programming options like locking parameters, adjusting audio levels, or setting button assignments, refer to the detailed instructions in the manual for the WIRELESS PACIFIC X100R Out of Vehicle Communication Solution.

By following these steps and referring to the manual for specific programming details, you can successfully install and use the Programmer for your WIRELESS PACIFIC X100R device on your Windows PC.