User Manual Q&AAnswer
Aug 22, 2025 - 08:42 PM
To set up multiple displays with the StarTech DKT31CHDVCM USB-C Mini Docking Station, follow these steps:
1. **Connecting Displays:**
- Connect your first display using either the DisplayPort, HDMI, or VGA port on the docking station, depending on the type of display connection your laptop supports.
- For additional displays, connect them in the following priority order: DisplayPort -> HDMI -> VGA.
- Ensure your laptop supports DP ALT Mode for the connected display to work properly.
2. **Resolution Compatibility:**
- The docking station supports various resolutions and frequencies for single-screen extended mode. Refer to the provided Product Resolution table in the user guide to ensure your display settings are within the supported range.
3. **Powering the Docking Station:**
- Unravel the wrap-around cable from the docking station housing and connect the USB-C connector to a USB-C or Thunderbolt 3 port on your host laptop.
4. **Connecting Peripherals:**
- Connect USB peripherals to the USB-A or USB-C ports on the docking station as needed.
- For network connectivity, use a CAT5e/6 cable to connect to the RJ45 port on the docking station and to a network device.
5. **Troubleshooting FCC Compliance:**
- If you encounter radio frequency interference issues, follow the FCC Compliance guidelines provided in the user guide to mitigate any potential disruptions.
By following these steps and referring to the detailed instructions in the user guide, you should be able to successfully set up and utilize multiple displays with the StarTech DKT31CHDVCM USB-C Mini Docking Station.
Add New Comment