User Manual Q&AAnswer
Aug 21, 2025 - 02:51 AM
To create and assign a Kmap to a campaign in the Adflow DMS using the Daktronics DD4656001 DMSTM Kmaps user guide, follow these steps as outlined in the manual:
1. **Creating a New Kmap:**
- Select the Kmaps module from the left-side menu.
- Click on the "New Kmap" button.
- Enter a name for the Kmap.
- Assign a home key from the pencil menu and click save.
2. **Building the Experience:**
- Go to the Roadmap tab to build the experience.
- Select "Add New."
- Enter a key name. For Video Library spots, use the naming convention: Video_#.
- Select the Spot from the Spot Tree and click OK.
- Repeat the above steps to add more content.
3. **Editing or Deleting Spots:**
- To edit spots, select the pencil icon. To delete spots, select the x icon.
4. **Creating an Attract Loop:**
- From the Roadmap tab, select Attract Loop Spots from the dropdown menu.
- Click on "Add New."
- Select one or more spots and click OK.
5. **Assigning to a Campaign:**
- Approve your Kmap.
- Once the Kmap is in Approved status, it can be assigned to a campaign.
- Check the campaign the Kmap is assigned to under the Activities tab.
By following these steps, you can successfully create, edit, assign, and manage Kmaps within the Adflow DMS using the Daktronics DD4656001 DMSTM Kmaps user guide.
Add New Comment