User Manual Q&AAnswer
Aug 21, 2025 - 02:00 AM
To configure the NetVu Uniplex Server NVR and add cameras for recording and monitoring, follow these steps outlined in the user guide:
1. **Identify and Connect to the NVR:**
- Identify the NVR on the network and connect to it using a web browser for configuration.
- Set the identity of the NVR, time, date, time zone, SNTP server, etc.
2. **Set Credentials and Configure Storage:**
- Set credentials for accessing the unit (strongly recommended).
- Add and assign any storage connected to the unit for recording.
3. **Add Cameras:**
- Identify and add any Closed IP Network Extenders, assigning base camera numbers.
- Add cameras on unmanaged switches and the client network if needed.
4. **Configure NVR Settings:**
- Set time, date, and network settings of the NVR.
- Configure user credentials for admin and remote users.
5. **Assign Network Extenders and Cameras:**
- Connect cameras to network extenders and assign them base camera numbers.
- Configure cameras from unmanaged switches or the client network.
6. **Apply Default Config Wizards:**
- Apply default configuration wizards for activity and camera fail reporting.
- Configure VMD and hardware alarms, global alerts, and ARC remote monitoring.
7. **Additional Steps:**
- Apply specific camera titles, review live and record image rate and quality profiles.
- Configure additional VMD and hardware alarms, global alerts, and ARC remote monitoring.
By following these steps, you can effectively configure the NetVu Uniplex Server NVR and add cameras for recording and monitoring as per your requirements. For more detailed information, refer to the Uniplex Server NVR user guide or the advanced installation manual provided by NetVu Ltd.
Add New Comment