User Manual Q&AAnswer
Aug 20, 2025 - 10:27 PM
To set the time and program on the EPH Controls A17 1 Zone Timeswitch, follow these steps as outlined in the instruction manual:
1. Ensure the timeswitch is disconnected from the mains power before starting any work.
2. The factory default settings include a 24-hour clock format, 5/2D program, and the backlight set to On.
3. To set the time, press the "SET" button followed by the "HOUR" and "MIN" buttons to adjust the time.
4. To set the program, press the "SET" button followed by the "PROG" button to select the desired program.
5. Additional settings such as Day-Light Saving can be adjusted as needed.
6. Once all settings are adjusted, ensure the timeswitch is securely closed and reconnect to the mains power.
Remember to refer to the instruction manual for specific details and safety precautions when setting up the EPH Controls A17 1 Zone Timeswitch.
Add New Comment