How do I install the EMOS ZD1121 LED Panel? (EMOS ZD1121 LED Panel User Manual)

Answer

manuals.plus

Aug 19, 2025 - 10:48 PM

According to the provided manual, here are the steps to install the EMOS ZD1121 LED Panel:
1. Mounting: The LED luminaire is designed for indoor use and should be mounted on a solid base, such as a wall or ceiling. Ensure that the panel is firmly mounted onto the surface.

2. Ingress Protection: The panel has an Ingress Protection rating of IP20, which means it is suitable for indoor use only.

3. Electrical Connection: Before installation, remove the connected testing conductors at the power supply input and replace them with conductors with double or reinforced insulation. Connect the power cord to a mains voltage of 230V~.

4. Safety Precautions:

- To prevent injury from electric current, ensure that the connecting conductor is not connected to the mains during installation. This task should only be performed by an authorized person.

- The luminaire is suitable for fixed mounting only and should be connected to an electric distribution network that complies with applicable standards.

- Before any manipulation or servicing of the luminaire, disconnect it from the AC power. This should also be done by an authorized person.

- If any part of the luminaire is damaged, do not use it.

- The LED chips inside the luminaire are not replaceable, and the inner wiring should not be changed.

- In case of a broken cover, do not use the luminaire and replace the broken cover immediately.

5. Disposal: The product should not be disposed of with domestic waste. Use special collection points for sorted waste and contact local authorities for information on disposal. Improper disposal could lead to dangerous substances affecting the environment and human health.

6. Additional Information: The manual also provides contact information for service inquiries, including the address, telephone number, and email of EMOS SI, the service provider for the product.

By following these installation instructions and safety precautions outlined in the manual, users can effectively install and use the EMOS ZD1121 LED Panel.