User Manual Q&AAnswer
Aug 17, 2025 - 11:42 PM
1. Connection: The GP2Y1014AU is an analog sensor, and since the Raspberry Pi does not have analog inputs, you will need to use the Analog to Digital Converter (KY-053) provided in the sensor kit. Follow the steps below to connect the sensor to your Raspberry Pi:
- Connect the sensor to your Raspberry Pi as shown in the provided picture and table in the manual.
2. Installation: To use the Analog to Digital Converter with the Raspberry Pi, you need to install the required library and configure the I2C interface. Follow these steps:
- Open the terminal on your Raspberry Pi and enter the command to install the necessary library.
- Enable the I2C interface by accessing the Raspberry Pi configuration menu and activating the I2C interface.
- Create a new program file, copy the sample code provided in the manual, save the file, and execute the program.
By following these steps, you should be able to successfully connect and use the GP2Y1014AU optical dust sensor with your Raspberry Pi. If you encounter any issues or need further assistance, you can reach out to Joy-IT's support team via email, phone, or their ticket support system as detailed in the manual.
Add New Comment