User Manual Q&AAnswer
Aug 17, 2025 - 11:08 PM
To link the decoder to another encoder using the AV Access 4KIP200D 4K HDMI Over IP Decoder, you can follow these steps:
1. Press and hold the "Info/Source" key on the decoder for 2 seconds. This action will initiate the linking process between the decoder and another encoder.
2. Make sure the other encoder you want to link to is powered on and connected to the same network.
3. Once the linking process is successful, the decoder will establish a connection with the selected encoder, allowing for seamless communication between the devices.
4. You can now start transmitting video signals from the linked encoder to the decoder, enabling you to display content on the connected display or monitor.
By following these steps, you should be able to link the AV Access 4KIP200D 4K HDMI Over IP Decoder to another encoder effectively, facilitating the transmission of audio and video signals between the devices.
Add New Comment