How do I set up a basic sound reinforcement system using the YAMAHA AM802 8 Channel Stereo Audio Mixer? (YAMAHA AM802 8 Channel Stereo Audio Mixer User Manual)

Answer

manuals.plus

Aug 17, 2025 - 09:37 PM

To set up a basic sound reinforcement system using the YAMAHA AM802 mixer, follow these steps:

1. Connect Sources: Connect your audio sources to the appropriate input channels on the mixer. Ensure that the MIC/LINE switch is set correctly for each channel based on the type of input source.

2. Connect AUX Sends and Returns: Connect the AUX SND outputs to external signal processors for effects, and then return the processed signal to the AUX RTN inputs on the mixer. Adjust the AUX controls to set up the desired effect mix.

3. Set Up Monitor Mixes: Use the AUX 2 and AUX 3 controls to create monitor mixes for different groups of performers on stage. Connect the AUX SND outputs to power amplifiers driving on-stage monitor speaker systems.

4. Connect Main Outputs: Connect the ST OUT L and R outputs to the main house power amplifier/speaker system to feed the main stereo signal to the audience.

5. Connect Recording Equipment: Connect a tape player or recorder to the REC OUT L and R jacks for recording purposes. Adjust the REC OUT control to set the recording level.

6. Adjust Levels: Use the various faders and controls on the mixer to adjust the levels of different signals, including AUX sends, stereo outputs, headphones, and recording outputs.

By following these steps and referring to the YAMAHA AM802 user manual for detailed specifications and control descriptions, you can set up a basic sound reinforcement system for your needs. Remember to always follow safety precautions and handle cables and equipment with care to prevent damage.