How do I set up and control the NITROBALL2 LED Rotating Ball for my event lighting needs? (EVENT LIGHTING NITROBALL2 LED Rotating Ball User Manual)

Answer

manuals.plus

Aug 14, 2025 - 07:09 PM

To set up and control the NITROBALL2 LED Rotating Ball for your event lighting needs, follow these steps:

1. Installation: Use the included rapid lock clamp to attach the ball to a lighting stand, trussing, or bar, ensuring to use a safety chain for secure mounting. Make sure there is adequate ventilation around the product and do not mount it in a side orientation.

2. Safety Instructions: Ensure you are connecting to the proper voltage, avoid exposure to moisture, and maintain proper ventilation. Always disconnect from the power source before servicing and secure the fixture using a safety chain.

3. DMX Control: The NITROBALL2 can be controlled via DMX, Sound Activation, Stand Alone, or Master/Slave modes. It has 13 DMX channels for various functions like pan rotation, dimming, strobing, and color control.

4. DMX Address Setting: Each fixture must have a unique DMX address for individual control. Set the DMX address to control each fixture separately, ensuring each address is at least 13 channels apart.

5. Cleaning and Maintenance: Periodically clean the product using a wet cloth or glass cleaner to maintain maximum light output. Avoid using alcohol-based cleaners or solvents as they can damage the product.

6. Error Messages: In case of an error message like "PAN-ERR," power off the unit, clear any obstructions, and power it back on. If the error persists, contact your local dealer for advice or repairs.

By following these steps and referring to the user manual for detailed instructions, you can effectively set up and control the NITROBALL2 LED Rotating Ball for your event lighting requirements.