User Manual Q&AAnswer
Aug 09, 2025 - 12:53 AM
To reset the energy and demand values on the KRON Mult-K C Energy Multifunction Meter, you need to access the Configurations mode on the device. Here's a step-by-step guide on how to perform this operation:
1. Access Configurations Mode: With the analyzer in the main mode, press any key to enter the Configurations mode.
2. Navigate to Reset Command: Use the navigation keys to scroll through the available options until you find the "Reset Senha" parameter.
3. Initiate Reset: Once you have highlighted the "Reset Senha" parameter, press the corresponding key to confirm the reset operation.
4. Confirmation: The meter will prompt you to confirm the reset operation. Follow the on-screen instructions to proceed with the reset.
5. Verification: After the reset is completed, verify that the energy and demand values have been successfully reset to their default or zero values.
By following these steps, you can reset the energy and demand values on the KRON Mult-K C Energy Multifunction Meter as per the user manual guidelines.
Add New Comment