User Manual Q&AAnswer
Aug 07, 2025 - 01:01 AM
After following the steps outlined in the kvm-tec USB Mouse Driver Installation Guide, you can verify if the driver has been successfully installed by checking the Device Manager on your computer. Here's how you can do it:
1. Open Device Manager: You can access Device Manager by right-clicking on the Start button and selecting "Device Manager" from the menu that appears.
2. Check for the Mouse Device: In Device Manager, locate and expand the section for "Mice and other pointing devices" or a similar category that lists connected input devices.
3. Verify the Driver Installation: Look for your kvm-tec USB Mouse in the list of devices. If the driver has been successfully installed, you should see the mouse listed without any warning icons (yellow triangle with an exclamation mark) or error messages next to it.
4. Test the Mouse Functionality: To ensure that the driver is working correctly, you can test the functionality of the mouse by moving it and checking if the cursor responds accordingly on your screen.
5. Confirmation Message: If the driver installation was successful, you may also receive a confirmation message indicating that the driver has been installed properly. This message typically appears after completing the installation process as mentioned in the installation guide.
By following these steps and checking the Device Manager for the presence of the kvm-tec USB Mouse without any issues, you can confirm that the driver installation was successful and that your mouse should now be functioning correctly on your computer.
Add New Comment