User Manual Q&AAnswer
Aug 06, 2025 - 10:59 PM
If the wireless connection between the soundbar and subwoofer fails to resume automatically, you can follow these steps to complete the pairing process:
1. Power on the subwoofer. The status indicator should blink slowly, indicating no active wireless connection.
2. Press the "PAIR" button on the back panel of the subwoofer to put it into pairing mode. The status indicator will blink rapidly.
3. Press the "PAIR" button on the back panel of the active speaker, or press and hold the " " button for 3 seconds on the remote control to put it into pairing mode. The "PAIR" icon will show and blink rapidly in the display window.
4. Wait until the status indicator on the subwoofer is lit constantly, and the "PAIR" icon is lit for 2 seconds in the display window on the active speaker. This indicates that the pairing is complete, and a wireless connection is established.
Refer to the user manual for visual aids and additional details on the pairing process.
Add New Comment