User Manual Q&AAnswer
Aug 06, 2025 - 10:44 PM
To restore the factory settings of the Homematic HMIP-PS Pluggable Switch, follow these steps as outlined in the user manual:
1. Unplug the device from the socket.
2. Plug in the device into the socket again while pressing and holding down the system button (A) for 4 seconds at the same time, until the LED will quickly start flashing orange.
3. Release the system button again.
4. Press and hold down the system button again for 4 seconds, until the status LED lights up green.
5. Release the system button to finish the procedure.
After following these steps, the device will perform a restart and be reset to its factory settings.
Add New Comment