User Manual Q&AAnswer
Aug 05, 2025 - 06:54 AM
To connect your Thundercomm TurboX RB5 LU Development Kit to a Wi-Fi network, you can follow the steps outlined in the installation guide provided by Thundercomm. Here is a summary of the process:
1. Option 1: Using Command on the Device:
- Execute the following command on the device:
```
nmcli dev wifi connect 'test_xkx' password '12345678' iface wlan0
```
2.Option 2: Using Windows PC and ADB:
- Create the `wpa_supplicant.conf` file on a Windows PC.
- Execute the following command on the command line:
```
adb push wpa_supplicant.conf /data/misc/wifi/
```
- Execute the following commands on the device:
```
wpa_supplicant -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf svc wifi enable reboot
By following these steps, you should be able to successfully connect your Thundercomm TurboX RB5 LU Development Kit to a Wi-Fi network as per the provided installation guide.
Add New Comment