User Manual Q&AAnswer
Aug 04, 2025 - 10:48 PM
To enable the turbo function on the NexiGo NS60 Wireless Controller, follow these steps:
1. Press the Turbo button and one of the compatible buttons (A/B/X/Y/L1/R1/12/R2/D-pad) to enable the semi-auto turbo function on that button.
2. Repeat the above step to enable full-auto mode (excluding the D-pad, which does not support full-auto mode).
3. Repeat the process a third time to disable the Turbo function.
Turbo Speed Adjustment:
- Press the Turbo button and pull the Right Joystick downward simultaneously to decrease the turbo speed.
- Press the Turbo button and push the Right Joystick upward to increase the turbo speed.
- Turbo speed can be adjusted in three levels:
a. Activates 5 times per second
b. Activates 12 times per second (Default)
c. Activates 20 times per second
Haptic Feedback Strength Adjustment:
- Press the Turbo button and the - button simultaneously to decrease the haptic feedback vibration strength.
- Press the Turbo button and the + button simultaneously to increase the haptic feedback vibration strength.
- After selecting a vibration level, the motor will vibrate at the chosen level for 0.5 seconds to confirm the choice.
- There are four adjustment levels for haptic feedback:
a. Off - Turns off the vibration motors completely.
b. Weak - Provides minimal feedback.
c. Medium - Default setting with noticeable feedback.
d. Strong - Maximum setting with significant feedback.
By following these steps, users can easily enable and adjust the turbo function and haptic feedback on the NexiGo NS60 Wireless Controller for an enhanced gaming experience.
Add New Comment