User Manual Q&AAnswer
Aug 04, 2025 - 04:22 AM
To connect a source device to your SAMSUNG QB49R Smart LED Display, follow these steps:
1. Identify the Ports: The QB49R display comes with various ports for connecting source devices. These ports include USB ports, LAN port, RS232C adapter, DVI IN, HDMI ports, and audio input/output ports.
2. Select the Correct Cable: Depending on your source device, choose the appropriate cable for the connection. For example, use a DVI cable or HDMI-DVI cable for DVI IN, HDMI cable for HDMI ports, audio cable for audio input/output, and LAN cable for connecting to the internet.
3. Connect the Cables: Plug one end of the selected cable into the corresponding port on the QB49R display and the other end into the output port of your source device.
4. Power On: Once the cables are connected, power on both the QB49R display and your source device.
5. Select Input Source: Use the remote control to select the input source on the QB49R display that corresponds to the port where your source device is connected.
6. Adjust Settings: Depending on the source device, you may need to adjust the display settings on the QB49R to optimize the viewing experience.
7. Test the Connection: Play content on your source device to ensure that the connection is working properly and that the display is showing the content from the source device.
By following these steps and referring to the user manual for detailed specifications and instructions, you should be able to successfully connect your source device to the SAMSUNG QB49R Smart LED Display for an enhanced viewing experience.
Add New Comment