User Manual Q&AAnswer
Aug 01, 2025 - 09:14 PM
To properly install and configure the HUAWEI UPS2000-G-6KRTLL, follow these steps based on the user manual:
1. Installation:
- Read the UPS2000-G-6KRTLL User Manual thoroughly before installation to understand product information and safety precautions.
- Use fully insulated tools during installation and operation.
- Only certified engineers should install, commission, and maintain the UPS to avoid personal injury or equipment damage.
- Follow the guidelines for rack-mounting the UPS2000-G, ensuring proper spacing and cable routing as specified in the manual.
2. Installing Cables:
- Connect UPS AC input and output power cables in the correct phase sequence and ensure battery terminals are connected correctly.
- Before connecting cables, ensure input, output, and battery circuit breakers are OFF to prevent accidents.
- Follow the recommended power cable specifications for both AC and battery connections as provided in the manual.
3. Setting Key UPS Parameters:
- Switch on external battery and AC input circuit breakers to transfer the UPS to standby mode.
- Access the UPS setting mode by pressing SELECT for 1s on a non-setting screen and entering the initial password.
- Set output voltage, number of parallel UPSs, and battery capacity based on site requirements.
- Return to standby screen by pressing ON/MUTE+SELECT after setting parameters.
4. Common Settings:
- Start the inverter by pressing and holding ON/MUTE for more than 5 seconds and shut down by pressing and holding OFF/ENTER for more than 5s.
- Ensure proper load shutdown and circuit breaker switching as per site requirements.
5. Alarm Handling:
- Familiarize yourself with the various alarm codes and their severity levels as listed in the manual.
- Understand the trigger conditions and suggested actions for each alarm to address any issues promptly and prevent system downtime.
By following these installation, configuration, and operational guidelines outlined in the user manual, you can effectively set up and maintain the HUAWEI UPS2000-G-6KRTLL for reliable power protection in your environment.
Add New Comment