User Manual Q&AAnswer
Jul 30, 2025 - 06:11 AM
To reset or re-pair the BLE Mesh code for the Banggood BM-104B Smart Switch Module, follow these steps as outlined in the instruction manual:
1. Reset Switch (Set as reset switch in APP):
- Press the switch button for 10 times to hear the beep sounds continuously. (If using a rocker light switch, press the rocker light switch for 20 times).
2. Rocker Light Switch (Set as rocker switch in APP):
- Press the switch button for 10 times (ON/OFF cycle for 5 times) to hear the beep sounds continuously. (If using a reset switch, press the reset switch for 5 times).
3. Reset Button:
- Long press the button on the module to hear the beep sounds continuously.
After performing the reset, you can attempt to configure the switch module again following the pairing methods provided in the manual. Ensure that your phone is connected to Wi-Fi and Bluetooth, and follow the steps for adding devices via the Smart Life/Tuya App.
If you encounter any difficulties during the reset or re-pairing process, refer back to the manual for additional troubleshooting tips or contact Banggood customer support for further assistance.
Add New Comment