User Manual Q&AAnswer
Jul 30, 2025 - 05:24 AM
If you encounter an error while using the JBC UCR General-Heavy Duty Control Unit, the red light on the unit will flash a certain number of times, indicating an error number. Here's how you can troubleshoot the error codes:
1. **Identify the Error Code:** The number of times the red light flashes corresponds to a specific error code. Refer to the table in the instruction manual to determine the meaning of the error code.
2. **Contact JBC Technical Service:** If the error persists after troubleshooting, it is recommended to contact JBC technical service for further assistance. They can provide guidance on resolving the issue and may suggest sending the unit for repair if necessary.
3. **Error Code Table:** The manual should include a table that lists the error codes along with their descriptions. This table will help you understand the nature of the issue and take appropriate action.
Remember to always follow safety guidelines and disconnect the power supply before attempting any troubleshooting or maintenance procedures on the control unit. If unsure or unable to resolve the error, it's best to seek assistance from JBC's technical service to ensure the proper functioning of the equipment.
Add New Comment