User Manual Q&AAnswer
Jul 29, 2025 - 05:33 AM
1. Unlock and Install Fixture to Ceiling Grid:
- Unlock the two nuts at the ends of the fixture.
- Install the fixture to the ceiling grid and tighten the two terminal nuts.
2. Secure Junction Box to Fixture:
- Unlock the nuts from both ends of the junction box.
- Secure the junction box to the fixture and tighten the two terminal nuts.
3. Connect Fixture to Junction Box:
- Connect the connector (RJ45) from the fixture to the output connector of the junction box.
- Note that one driver can only support a maximum of 3 units.
4. Wiring Connections:
- Open the junction box and connect the L (live), N (neutral), G (ground) wires using the 4-pin connectors.
- Connect the dimming wire with the orange connector cap.
5. Finish Installation:
- Cover the plasterboard to finish installation and ensure there are no openings in the ceiling.
6. Custom Installation Shapes:
- For different installation shapes like "L," "T," or "+," follow the specific steps outlined in the manual for each shape design.
7. Safety Precautions:
- Turn off the power at the fuse or circuit breaker box before installation and maintenance.
- Wear rubber-soled shoes and work on a sturdy wooden ladder.
- Ground the fixture to avoid potential electric shock.
- Handle metal parts carefully to prevent cuts.
8. Additional Information:
- The fixture is suitable for indoor applications only and must be installed according to the National Electric Code and local building codes.
- The fixture body is one piece, and disassembly or alterations are not recommended.
- The device complies with part 15 of the FCC Rules for electromagnetic interference.
By following the detailed installation instructions provided in the manual, users can safely and correctly connect and install the Sunlite 88795-SU LED T-Grid Fixture for effective indoor lighting solutions.
Add New Comment