User Manual Q&AAnswer
Jul 29, 2025 - 05:23 AM
To program the inELS RFSAI-61B Wireless Switch for different functions, follow these steps as outlined in the instruction manual:
1. Function Button:
- Press the programming button on the receiver RFSAI-61B for 1 second to activate programming mode.
- Select and press one button on the wireless switch to assign the function Button.
- Press the programming button on the receiver RFSAI-61B for less than 1 second to finish programming mode.
2. Function Switch On:
- Activate programming mode on the receiver RFSAI-61B.
- Press your selected button on the RF transmitter twice to assign the function switch on.
- Finish programming mode by pressing the programming button on the receiver RFSAI-61B for less than 1 second.
3. Function Switch Off:
- Follow similar steps as for Function Switch On but press the selected button on the RF transmitter three times to assign the function switch off.
4. Function Impulse Relay:
- Activate programming mode on the receiver RFSAI-61B.
- Press your selected button on the RF transmitter four times to assign the function impulse relay.
5. Function Delayed Off:
- Activate programming mode on the receiver RFSAI-61B.
- Press your selected button on the RF transmitter five times to assign the delayed off function.
- Press the programming button on the receiver RFSAI-61B for longer than 5 seconds to activate the actuator into timing mode.
- Release the button to start counting the delayed return time.
- Press the button on the RF transmitter to store the set time interval into the actuator memory.
6. Function Delayed On:
- Follow similar steps as for Function Delayed Off but press your selected button on the RF transmitter six times to assign the delayed on function.
By following these programming steps, users can configure the inELS RFSAI-61B Wireless Switch to perform different functions based on their requirements. Always refer to the instruction manual for detailed programming instructions and guidelines.
Add New Comment