User Manual Q&AAnswer
Jul 29, 2025 - 05:19 AM
To connect the USB-NORA-W256AWS evaluation board to your computer for setup, follow these steps:
1. Connect the USB-NORA-W256AWS evaluation board to your host machine using the USB connector provided in the kit.
2. Open a terminal application on your host machine, such as TeraTerm for Windows or CoolTerm for Mac.
3. Select the port corresponding to the evaluation kit. Consult the documentation for your operating system to find out how to detect the port used by the evaluation kit.
4. Configure the terminal application with the following settings:
- Baudrate: 115200
- Bits: 8
- Parity: None
- Stop: 1
- Flow control: None
- Local Echo: Yes
To verify the connection to the evaluation board:
1. Open the terminal window.
2. Type "AT" and press return.
3. Verify that an "OK" response is displayed in the terminal window, confirming that the evaluation kit is successfully connected to your host machine.
Keep the terminal application open, as it will be needed for further steps in connecting and interacting with the AWS cloud and troubleshooting.
This information is based on the USB-NORA-W256AWS AWS IoT ExpressLink Multiradio Development Kit User Guide provided by u-blox.
Add New Comment