User Manual Q&AAnswer
Jul 28, 2025 - 10:50 PM
To switch between different input sources on the C4i 4K60 4x1 Multiviewer Seamless UHD Video Switcher, follow these steps:
1. **Single Screen Display Mode:**
- Press the "INPUT" button on the front panel to switch between different input sources.
- The corresponding input LED on the front panel will light up in green for the selected input source.
2. **Multiview Display Mode:**
- Press the "Multiview" button on the front panel to cycle through different multiview display modes.
- Short press the button to select from options like SINGLE, PIP, PBP (1), PBP (2), Triple (1), Triple (2), Quad (1), Quad (2).
- Long press the button for 3 seconds to select the aspect ratio for certain display modes.
3. **IR Remote Control:**
- Use the IR remote provided with the switcher to switch between input sources.
- Press the corresponding HD 1/2/3/4 buttons on the remote to select the desired input source.
- The selected input LED on the front panel will light up in green.
4. **OSD Menu Navigation:**
- Use the OSD menu navigation buttons on the IR remote to access advanced settings and switch between input sources.
- Navigate to the appropriate menu options to select input sources and configure display settings.
By following these steps using the front panel buttons, IR remote, or OSD menu navigation, you can easily switch between different input sources on the C4i 4K60 4x1 Multiviewer Seamless UHD Video Switcher.
Add New Comment