User Manual Q&AAnswer
Jul 28, 2025 - 03:03 AM
To connect your TCP SMABLFAN1500WBHN1903 Bladeless Smart Oscillating Heater to WiFi and control it using the TCP Smart App, please follow these steps:
1. Make sure your heater is turned on.
2. Hold down the On/Off button on the heater until it beeps and the LED light above the button blinks quickly. This indicates that the device is in pairing mode.
3. Download the TCP Smart App from the Google Play Store or Apple App Store on your smart device (mobile phone or tablet).
4. Open the TCP Smart App and enter your WiFi password.
5. Follow the instructions in the app to connect your heater to WiFi.
6. Once connected, you can control your heater remotely using the TCP Smart App.
Additional Tips:
- Ensure your home WiFi router is running on 2.4GHz and not 5GHz.
- Turn off any WiFi extenders during the setup process.
- Check if there are any limitations on the number of devices that can be connected to your broadband provider.
- Remember that the TCP SMABLFAN1500WBHN1903 Bladeless Smart Oscillating Heater does not work on 5GHz WiFi networks.
For more detailed information, you can refer to the user manual provided with your heater.
Add New Comment