User Manual Q&AAnswer
Jul 26, 2025 - 07:09 AM
Proper maintenance and storage of your K&S Basic Inverter Generator are essential to ensure its longevity and optimal performance. Here are the steps you should follow based on the manual:
1. **Technical Maintenance Works:**
- Regularly check and change motor oil, air filter, spark plug, and fuel tank filter as per the maintenance schedule outlined in the manual.
- Ensure the oil level is correct and use recommended engine oil.
- Clean the air filter by washing it in warm water, drying it, and moistening it with machine oil.
- Inspect the spark plug for damage and correct gap, replacing if necessary.
- Clean the muffler screen and spark arrester using a wire brush.
- Clean the fuel tank filter with gasoline.
2. **Generator Storage:**
- Store the generator in a dry, well-ventilated area free from dust.
- Keep the generator away from children and animals.
- If the generator will not be used for a long time, drain the fuel and motor oil, and clean the generator from dirt and dust.
- When starting the generator after long-term storage, follow the reverse order of steps outlined in the manual.
3. **Generator Transportation:**
- Use the original packaging for transportation to prevent tipping.
- Drain the fuel and disconnect the battery terminals before moving the generator.
- Lift the generator by holding the frame or using transportation handles.
4. **Generator and Battery Utilization:**
- Dispose of the generator and battery in a safe and environmentally friendly manner by recycling them at a designated disposal facility.
By following these maintenance and storage guidelines, you can ensure that your K&S Basic Inverter Generator remains in good working condition for years to come. For more detailed instructions and specific maintenance intervals, refer to the full version of the manual provided by the manufacturer.
Add New Comment