How to config SimplyVAV controller for zoning system using the KMC CONTROLS Zoning Equipment Controller? (KMC CONTROLS Zoning Equipment Controller User Guide)

Answer

manuals.plus

Jul 22, 2025 - 05:21 AM

To configure the SimplyVAV controller for your zoning system using the , follow these steps as outlined in the user guide:

1. **Insert the KMC SSS-101x differential pressure flow pickup tube:** Convert the local pressure-dependent zone to pressure-independent operation by inserting the differential pressure flow pickup tube.

2. **Operate the local zone with the SimplyVAV terminal unit controller:** The SimplyVAV controller will provide pressure-independent VAV control in the respective zones, compensating for varying needs and operations in other zones.

3. **Control damper position for space environmental conditions:** The SimplyVAV controller will control the damper position based on space environmental conditions and differences in duct pressure.

4. **Use the STE-8000 series digital room sensor:** This sensor reads the varying environmental conditions in the zone and is the only tool needed to configure and balance the SimplyVAV controller.

5. **Add an STE-140x DAT sensor for changeover capability:** Adding this sensor enables heating and cooling control changeover.

6. **Integrate up to 16 SimplyVAV controllers with the BAC-120063CWZEC model FlexStat:** This integration allows for control of common commercial packaged unitary equipment with seamless communication between the controllers.

7. **Configure the occupancy schedule:** If the defaults describe your equipment, the only required configuration needed after mounting and wiring is setting up the occupancy schedule via the FlexStat’s onscreen menu.

8. **Monitor and control the system via a BACnet network:** The ZEC system communicates with any Building Automation System using a BACnet network for monitoring and additional control options.

By following these steps, you can effectively configure the SimplyVAV controller for your zoning system using the KMC CONTROLS BAC-120063CW-ZEC Zoning Equipment Controller, ensuring optimal temperature control and energy efficiency in different zones.