User Manual Q&AAnswer
Jun 26, 2025 - 01:01 AM
To adjust the sensitivity and timer settings of the OMNI Ceiling Mount Sensor, you can modify the sensor controls using the Bank A and Bank B DIP switches as outlined in the manual:
**Bank A DIP Switches:**
- **A1:** Auto/Manual - Choose between automatic (normal) or manual on (bypass on override).
- **A2:** Threshold - Dual Technology Mode - Select between high confidence (requires both passive infrared and ultrasonic detection) or high sensitivity (either passive infrared or ultrasonic detection).
- **A3:** LED Motion Indicator - Enable or disable LED indicators when motion is detected.
- **A4:** Reset Learned Setting - Choose to retain settings (normal) or erase all learned settings and restart learning.
**Bank B DIP Switches:**
- **B1:** Strong Airflow Compensation - Select normal or strong airflow present.
- **B2:** Over Doorway Installation - Choose between sensor mounted away from the door or over the doorway with a low turn-on threshold.
- **B3:** Timer Adjust - Decide whether to adjust the timer automatically (normal) or manually using the black timer xxxx .
- **B4:** Auto Sensitivity - Opt for adjusting sensitivity automatically (normal) or manually using the red infrared sensitivity xxxx and/or green ultrasonic sensitivity xxxx .
By adjusting these DIP switches, you can customize the sensor's behavior to better suit your specific requirements. Remember to refer to the manual for detailed instructions on how to access and modify these settings safely and effectively.
Add New Comment