User Manual Q&AAnswer
Jun 10, 2025 - 04:30 AM
To configure the WiFi connection for your M5STACK-CORE2 IoT Development Kit, you can follow these steps as outlined in the user manual:
1. **Burn Configuration WiFi (Recommended):**
- Ensure you have UIFlow-1.5.4 or a newer version installed.
- Use M5Burner to write WiFi information directly to the device.
2. **AP Hotspot Configuration WiFi:**
- Press and hold the power button on the left side to turn on the device.
- If WiFi is not configured, the device will enter network configuration mode automatically on first startup.
- To re-enter network configuration mode later:
- Quickly click the Home button (center M5 button) after the UIFlow Logo appears at startup to enter the configuration page.
- Use the buttons on the device to navigate to WiFi Setting and start the configuration process.
- Connect to the device's hotspot with your mobile phone.
- Open a browser on your phone, scan the QR code displayed on the screen, or access 192.168.4.1 directly.
- Fill in your personal WiFi information on the page and click Configure to save the settings.
- The device will restart automatically after successful configuration and enter programming mode.
**Note:** Avoid using special characters like spaces in the configured WiFi information.
By following these steps, you should be able to successfully configure the WiFi connection for your M5STACK-CORE2 IoT Development Kit, enabling network programming and API key pairing.
Add New Comment