User Manual Q&AAnswer
May 30, 2025 - 12:53 AM
To connect your RunCam Thumb Pro 4K Camera to your flight controller for remote control operations, follow these steps:
1. **Preparation:**
- Make sure your flight controller is running one of the following firmware versions: BetaFlight Firmware (3.2.0), CleanFlight Firmware (2.1.0), KISS Firmware (1.3-RC30), or INAV Firmware (1.7.3).
- Locate an available UART interface on your flight controller.
2. **Connection:**
- Connect the RunCam Thumb Pro to the UART interface of your flight controller using the provided cable.
3. **Recognition:**
- Ensure that the Flight Controller recognizes the RunCam Thumb Pro. This may involve configuring the settings on your flight controller to detect the camera.
4. **Function Assignment:**
- Follow the instructions in the manual to assign specific functions of the camera to transmitter channels on your controller. This allows you to control the camera remotely.
5. **Switch Assignment:**
- Assign a specific channel on your transmitter/controller to control the camera functions. This will enable you to trigger recording, switch modes, etc., using your controller.
6. **Testing:**
- Test the connection and functionality by operating the camera through your transmitter/controller. Ensure that the commands are being received and executed correctly.
By following these steps and referring to the detailed instructions provided in the manual, you should be able to successfully connect your RunCam Thumb Pro 4K Camera to your flight controller for remote control operations.
Add New Comment