User Manual Q&AAnswer
May 25, 2025 - 11:15 PM
To switch between the different flight modes on the MODSTER Arrows Vector Flight Control System, follow these steps:
1. The Vector flight control system operates in 3 flight modes - Stability, Dynamic, and Direct.
2. Utilize a 3-position switch on your transmitter to transition between the flight modes. The middle position is the Direct mode by default.
3. If your transmitter only has a 2-position switch, the Vector system will switch between Stability and Dynamic flight modes only.
4. Here is a breakdown of each flight mode:
- **Stability mode:** In this mode, Vector will return the aircraft to level flight whenever no control inputs are detected. It is suitable for beginner pilots or as a safe mode in emergency situations.
- **Dynamic mode:** This mode allows pilots to retain complete control of the aircraft. The Vector flight controller intervenes only when it detects movement not initiated by the pilot, such as wind gusts or crosswinds.
- **Direct mode:** Expert pilots who want a pure flight experience with no electronic intervention can use this mode. The flight controller does not provide any input unless switched back to Stability or Dynamic modes.
5. Ensure that you understand the functionality of each mode and select the appropriate mode based on your skill level and flying conditions.
By following these steps and understanding the different flight modes, you can effectively switch between them using the MODSTER Arrows Vector Flight Control System.
Add New Comment