User Manual Q&AAnswer
May 24, 2025 - 11:07 AM
To set the temperature and time for the sauna function on the Foshan Seepex SIP-IO15 Advanced Computer Dry Steam Room Control System, follow these steps as per the installation guide:
1. **Temperature Setting:**
- Press the "+" or "-" button to adjust the preset temperature. The temperature can be set within the range of 20°C to 80°C.
- The current temperature will be displayed in the upper left corner of the panel (10°C to 85°C).
- The system defaults to the last set temperature. The heater will work to maintain the preset temperature. When the room temperature is lower than the preset temperature, the heater operates. Once the room temperature reaches or exceeds the preset temperature, the heater stops working to maintain a constant temperature.
- If the room temperature drops more than 2°C below the preset temperature during constant temperature mode, the heater will resume heating. The sauna function will turn off when the countdown timer reaches zero.
2. **Time Setting:**
- Press the "+" or "-" button to adjust the preset sauna working time. The time can be set between 15 to 90 minutes.
- The system will record the set time as the preset sauna working time for the next session.
By following these instructions, users can customize the temperature and time settings for their sauna sessions using the Foshan Seepex SIP-IO15 control system.
Add New Comment