User Manual Q&AAnswers
May 07, 2025 - 07:48 AM
According to the LOCINOX 05LV40 Surface Mounted Battery Powered Code Lock manual, here are the steps to change the entry and exit codes:
1. Press the programming button on the inside code panel.
2. Enter the current master code.
3. Press the programming button again.
4. Enter the new master code.
5. Press the programming button to confirm.
6. Enter the new user code.
7. Press the programming button to confirm.
8. Repeat steps 6 and 7 for additional user codes if needed.
9. Press the programming button to exit programming mode.
It is important to refer to the specific instructions in the manual for detailed guidance on changing the entry and exit codes.
May 07, 2025 - 07:56 AM
According to the LOCINOX 05LV40 Surface Mounted Battery Powered Code Lock manual, here are the steps to change the entry and exit codes:
1. Press the programming button on the inside code panel.
2. Enter the current master code.
3. Press the programming button again.
4. Enter the new master code.
5. Press the programming button to confirm.
6. Enter the new user code.
7. Press the programming button to confirm.
8. Repeat steps 6 and 7 for additional user codes if needed.
9. Press the programming button to exit programming mode.
It is important to refer to the specific instructions in the manual for detailed guidance on changing the entry and exit codes.
Add New Comment