How do I use the MCC CPVC Pipe Cutters? (MCC CPVC Pipe Cutters User Manual)

Answer

manuals.plus

May 03, 2025 - 12:46 AM


To use the MCC CPVC Pipe Cutters, please follow these steps:



1. Position the pipe: Ensure that the pipe you want to cut is securely positioned and stable.



2. Open the handles: Use your hand to open the handles of the pipe cutter. The quick release feature allows for easy and fast blade opening.



3. Place the cutter: Position the cutter's blade around the pipe at the desired cutting point. Make sure the blade is aligned properly with the pipe.



4. Apply pressure: Close the handles of the cutter firmly to apply pressure on the pipe. The ergonomic handle design maximizes leverage, making it easier to cut through the pipe.



5. Rotate the cutter: While maintaining pressure on the handles, rotate the cutter around the pipe in a circular motion. This will gradually cut through the pipe.



6. Complete the cut: Continue rotating the cutter until the pipe is completely cut. The DuraBladeTM technology ensures durability, sharpness, and less cracking during the cutting process.



7. Release the handles: Once the cut is complete, release the handles to open the blade and remove the cutter from the pipe.



8. Repeat if necessary: If you need to make multiple cuts, repeat the above steps for each section of the pipe.



Note: It is important to use the MCC CPVC Pipe Cutters according to the instructions provided in the user manual to ensure safe and effective operation.