User Manual Q&AAnswer
May 02, 2025 - 04:58 AM
To configure and download the LogTag UTRID-16 data logger, you will need to use the LogTag Analyzer software, which can be downloaded for free from the LogTag website at https://logtagrecorders.com/software/.... The software allows you to set up the parameters required for starting and recording temperature values on the logger.
Here is a step-by-step guide on how to configure and download the logger:
1. Download and install the LogTag Analyzer software from the provided link.
2. Connect the UTRID-16 data logger to your computer using the built-in USB plug.
3. Open the LogTag Analyzer software.
4. In the software, go to the "Configuration" tab.
5. Set up the desired parameters for starting and recording temperature values, such as start delay, recording intervals, alarm thresholds, etc.
6. Once you have configured the logger, replace the protective cap.
7. The logger is now ready to start. Press the START/Mark button on the logger to begin recording temperatures.
8. During the recording process, you can monitor the temperature readings and alarm conditions on the built-in display of the logger.
9. To download the recorded data, connect the logger to your computer using the USB plug.
10. In the LogTag Analyzer software, go to the "Download" tab.
11. Click on the "Download" button to retrieve the data from the logger.
12. The downloaded data can be analyzed and reviewed using the LogTag Analyzer software or other PDF software, such as Acrobat Reader.
For more detailed instructions and information on configuring, downloading, and analyzing the data from the LogTag UTRID-16 data logger, please refer to the complete UTRID-16 Product User Guide available on the LogTag website at https://logtagrecorders.com/product/utrid-16/.
Add New Comment